|
A U T H O R S |
P A P E R T I T L E |
C O U N T R Y |
|
G e o l o g y |
||
| Milenko Jovanovic, Miroslava Maksimovic,Vladan Marinkovic, Goran Packovski | Landfill utilization with copper "Depo clay - 1" | Serbia |
| Vladan Marinkovic, Miroslava Maksimovic, Milenko Jovanovic, Goran Packovski |
Geomodel development of coal deposits (Potrlica, Cementara and a part of Kalusic) with the calculation of reserves using the program of deposit modelling and design the open pits minex 5.2.3 | Serbia |
|
U n d e r g r o u n d m i n i n g |
||
|
Dejan Bogdanović, Ivana Ilić, Dragiša Stanujkić |
Mining method selection by combinated AHP and MCDM under uncertainty methodology |
Serbia |
| Živorad Milićević, Igor Svrkota, Dejan Petrović | Ore body “T” – a challenge for technological improvements of underground mining in Jama Bor coal mine |
Serbia |
| Živorad Milićević, Igor Svrkota, Dejan Petrović | Possible solution for extraction of phosphorite sandstone deposit “Lisina” near Bosilegrad |
Serbia |
| Miroslav Ignjatović, Snezana Ignjatović, Radoje Pantović | Experimental determination of shear strength elements of the samples for "Tajmiste" mine | Serbia |
|
S u r f a c e m i n i n g |
||
|
Daniel Kržanović, Radmilo Rajković, Miomir Mikić |
Protection housing facilities from vibrations that stemming from the blasting on the open pit Zagradje 5 nearly Bor |
Serbia |
|
Jiří Fries, Josef Jurman, František Helebrant, Petr Klouda, Vlastimil Moni |
Vibration measurement on bucket wheel excavator SchRs 1320 |
Czech Republic |
|
Jiří Fries, Josef Jurman, František Helebrant, Petr Klouda, Vlastimil Moni |
Thermal measurement on bucket wheel excavator SchRs 1320 |
Czech Republic |
|
Mirad Delić, Adila Nurić, Samir Nurić, Vlado Radulović |
Određivanje stabilnosti završnih kosina odlagališta rudnika "Dubrave" |
Bosnia and Herzegovina |
|
Nenad Petrović, Ivan Toth, Alen Stranjik |
Determination rock parameters for efective blasting using GSI |
Croatia |
|
Radmilo Rajković, Daniel Kržanović, Branislav Rajković |
Analysis of stability during the cleaning of cassettes 1 and 2 of settling pond filter of waste water purification facilities of branch processing Vreoci by software geostudio 2007 |
Serbia |
|
Radmilo Rajković, Sveta Pavlović, Branislav Rajković |
Dynamics of deposit on "Dump II" of "Jazovnik" limestone open pit by software Gemcom 6.2 |
Serbia |
|
S. Strelec, M. Gazdek, B. Soldo |
Blasting design for obtaining desired fragmentation |
Croatia |
|
Miodrag Žikić, Daniel Kržanović, Radmilo Rajković |
Determining the real truck turning radius in the work on open pits |
Serbia |
|
Zlatko Ječmenica, Svetlana Renovica, Rajko Tomić, Nada Listeš, Gavrilo Đokić |
Geological structure and potentiality of Mezgraja-Tobut coal area |
Bosnia and Herzegovina |
|
Dragan Vucković, Vlado Gajić |
Application of information and control system on a surface mine “ Bogutovo Selo” |
Bosnia and Herzegovina |
|
Dragana Drazic, Milorad Veselinovic, Vesna Golubovic Curguz, Nevena Cule, Suzana Mitrovic |
Reclamation and postexploitation landscape modeling of open pit mines |
Serbia |
| Samir Nurić, Adila Nurić, Enver Hercegovac, Šehval Lapandić, Mirad Delić | Analysis compatibility loading-haulage complex for waste on the pit mine ''Vrtlište'' RMU Kkakanj | Bosnia and Herzegovina |
|
E x t r a c t I v e m e t a l l u r g y |
||
|
B. S. Boyanov, M. P. Sandalski, S. Z. Dineva |
Crusts formation during zinc concentrates roasting in lurgi fluid bed furnace |
Bulgaria |
|
Silvana Dimitrijević, Vlastimir Trujić, Mirjana Rajčić-Vujasinović |
Gold plating from a new electrolyte |
Serbia |
|
Žarko Radović, Aleksandra Jošanović, Milisav Lalović, Drago Žižić |
Desulphurization of low-alloy steels as function of optical basicity and sulphide capacity of slags |
Montenegro |
| Ljiljana Mladenović, Radmila Marković, Milan Petrov, Jasmina Stevanović | Leaching of useful components from mechanical-chemically activated sulphide materials |
Serbia |
| Ahmet Turan, Onuralp Yucel | Determination of Affecting Parameters on the Fire Assay of Pyritic Refractory Gold Ores | Turkey |
| Murat Alkan, Bora Derin, Onuralp Yücelp | Production of advance ceramics via self propagating high temperature syntesis method | Turkey |
|
M e t a l p r o c e s s I n g |
||
|
A. Ivanović, S. Milojević, V. Marjanović, V. C. Stamenković |
Effects of the protective atmosphere on the process of sintering in sintering furnace |
Serbia |
|
Mladen Mirić |
The influence of rolling on properties of gold streeps for jewelry |
Serbia |
| Svetlana Lj. Ivanov, Desimir D. Marković, Dragoslav M. Gusković | Structure and properties of O.F.H.C. copper wire after cold drawing and annealing | Serbia |
|
M I n e r a l p r o c e s s I n g |
||
|
Pashko Gega, Bardhyl Shushku |
Emergency risk reduction at three albanian teiling dams |
Albania |
|
Vesna Marjanović, Vesna Stamenković, Aleksandra Ivanović |
Importance of the mineral processing in a function of environment |
Serbia |
|
Daniela Urošević, Radmila Marković, Ljubiša Obradović, Vojka Gardić |
Evaluation the leaching characteristics components of ashes from Medoševacby SRPS EN 12457-1: 2008 |
Serbia |
|
Oliver Dimitrijević, Ljubiša Obradović, Srđana Magdalinović, Bojan Drobnjaković |
The new schema of the transport of technological water on Veliki Krivelj tailing pond |
Serbia |
| Slađana Krstić, Vesna Ljubojev, Milenko Ljubojev | Oil shale use with low organic matter content from the Vina-Zubetinac area | Serbia |
|
M a t e r I a l s s c i e n c e |
||
|
Biljana Zlatičanin, Mirjana Filipović |
Computer modelling the material properties and behaviour of Al-alloys |
Montenegro |
|
Bojan Janković |
The kinetic analysis of sodium bicarbonate (NaHCO3) decomposition process using nonisotermal approach |
Serbia |
|
Mircea Dobrescu, Sorin Dimitiru, Marius Vasilescu, Ioana Vasilescu |
Researches on increasing fatigue life of titanium alloys for aircrafts |
Romania |
|
Edis Softić, Branko Božić |
Evaluation of using stone aggregate for production stone flour (fillers) from the quarries across northeast Bosnia and their use in asphalt mixture |
Bosnia and Herzegovina |
|
Ion Mitelea, Marcela Elena Dimian, Ilare Bordeaşu |
Contributions to the microstructural changes induced by heat treatment of Ti-6Al-4V deformable alloy |
Romania |
|
Jelena Đoković |
The behaviour of interfacial cracking in bicrystals and bimaterials |
Serbia |
|
Metehan Erdoğan and İshak Karakaya |
On the electrochemical reduction mechanism of CaWO4 to W powder |
Turkey |
|
Mihajlo. B. Tošić, Jelena D. Nikolić, Vladimir D. Živanović, Snežana R. Grujić, Snežana N. Zildžović, Srđan M. Matijašević |
Effect of structure on dissolution properties of alkali phosphate glasses in water |
Serbia |
|
M. Gojić, S. Kožuh, T. Holjevac-Grgurić, A. C. Kneissl, I. Anžel, G. Lojen, M. Bizjak, B. Kosec |
DSC and SEM Analysis of the Cu-Al-Ni Shape Memory Alloys |
Croatia |
|
S. Grujić, M. Tošić, V. Živanović, J. Nikolić, S. Matijašević |
Devitrification and structural characteristic of potassium titanium germanate glasses |
Serbia |
|
Cinca-Ionel Lupinca, Cornelia-Ecaterina Cornean |
Conditions for the obtaining of vermicular graphite cast iron |
Romania |
|
Enkeleida Beqiraj-Goga, Fabrice Muller, Jean Claude Touray, Nevila Jozja |
X-ray diffraction characterization of zeolites from Munella region, Albania |
Albania |
|
Aleksandra Milosavljević, Dragana Živković, Ana Kostov, Radiša Todorović, Aleksandar Grujić |
Ecological leadfree solders based on tin and indium(part I) Ag3-15In7-35Sn90-50 |
Serbia |
|
Aleksandra Milosavljević, Dragana Živković, Ana Kostov, Radiša Todorović, Aleksandar Grujić |
Ecological leadfree solders based on tin and indium(part II) Cu1-5In9-45Sn90-50 |
Serbia |
|
Ana Kostov, Dragana Zivković |
Thermodynamic calculations in shape memory alloys Al-Ni |
Serbia |
|
Dejan Momcilović, Ivana Atanasovska |
Endurance testing on crack initatation and propagation of steel 12H1MF on impact loading |
Serbia |
|
Lidija Gomidželović, Dragana Živković, Nadežda Talijan, Dragan Manasijević, Ljubiša Balanović, Bata Marjanović |
Investigation of thermal, structural, mechanical and electrical properties of some Ga-In-Sb alloys |
Serbia |
|
Milica Vlahović, Velislav Vidojković, Sanja Martinović, Tamara Boljanac,Radmila Jančić-Heinemann, Tatjana Volkov-Husović |
Corrosion resistance of sulfur concrete in acidic solution |
Serbia |
|
Radiša Todorović, Aleksandra Milosavljević, Ljubinka Todorović |
Determination of carbide phase shape and distribution in IN.100 cast alloy |
Serbia |
|
Velislav Vidojković, Tamara Boljanac, Snezana Zildzović, Sanja Martinović, Milica Vlahović, Nataša Đorđević |
Copper removal from aqueous solutions by lignite and fly ash |
Serbia |
|
Ion Mitelea, Victor Budău, Claudia Dorohoi, Corneliu M. Crăciunescu |
Experimens on the possibilities and limits of using conventional friction welding for dissimilar and graded materials |
Romania |
|
Blaž Karpe, Borut Kosec, Milan Bizjak |
Heat transfer and cooling rate prediction during free jet melt spinning proces |
Slovenia |
| Jožef Medved, Primož Mrvar | Thermodynamic investigation of Mg – cast alloys | Slovenia |
| B. Markoli, P. J.McGuiness, B. Podmiljšak, I. Škulj, S. Kobe | Characterization of a magnetocaloric Gd5(GeSi)4 alloy made by arc melting | Slovenia |
| Zoran Avramović, Milan Antonijević | The corrosion behaviour of brass in acid solutions | Serbia |
| Vladan Ćosović, Nadežda Talijan, Tomáš Žák, Dragana Živković, Jasna Stajić-Trošić, Aleksandar Grujić | 57Fe Mössbauer spectroscopic phase analysis of nonstoichiometric Nd-Fe-B alloys | Serbia |
| Svetlana Lj. Ivanov, Emina D. Požega, Bata R. Marjanović | Modelling the formation of diffusion layers at boroning iron compact | Serbia |
| Lidija Ćurković, Ivan Kumić, Krešimir | Grilec SEM analysis of errosion mechanisms of alumina ceramics | Croatia |
| Lidija Ćurković, Danko Ćorić | Load dependence of knoop hardness for SiC ceramics | Croatia |
| Lidija Ćurković, Davor Ljubas, Veronika Marinović | Characterization of TiO2 films prepared by sol-gel method | Croatia |
| Milan B. Radovanović, Marija B. Petrović, Ana T. Stamenković, Milan M. Antonijević, Snezana M. Milić | Environmentally safe inhibition of Cu37Zn brass corrosion in alkaline sulphate sollution | Serbia |
|
I n o r g a n I c t e c h n o l o g y |
||
|
Zorica Ljubomirović, Suzana Dragulović, Smiljana Jakovljević |
Setting parameters and the selection of adequate water for obtaining colloidal silver water |
Serbia |
|
Sanja Martinović, Milica Vlahović, Marija Dimitrijević, Jelena Majstorović, Velislav Vidojković, Tatjana Volkov-Husović |
Effect of anisotropy on thermal shock behaviour of low cement high alumina castable |
Serbia |
|
E n v I r o n m e n t a l e n g I n e e r I n g |
||
|
Gabriel Badescu, Ovidiu Stefan, Mihai Virgil Radulescu, Badescu Rodica, Opre Vasile Claudiu, Ioel Samuel Veres |
The use of GIS is shown in taking decisions regarding on environmental projects |
Romania |
|
Gabriel Badescu, Ovidiu Stefan, Gheorghe Mugurel Radulescu, Soponar Mihaela, Badescu Rodica, Opre Vasile Claudiu, Mircea Ortelecan |
Ortofotoplan use and system GNSS position determination Rompos project management mine closure in Maramureş county |
Romania |
|
Irena Spasova, Marina Nicolova, Stoyan Groudev |
Biotechnological processing of electronic scrap |
Bulgaria |
|
Marija M. Janković, Dragana J. Todorović, Jelena D. Nikolić |
Contents of natural radionuclides in coal, ash and slag in the serbian power plants |
Serbia |
|
Miomir Mikić, Daniel Kržanović, Ružica Lekovski |
Environmental protection of open pit deo Donja Bela Reka influence |
Serbia |
|
Mirko Ristić |
Remedial works design of the overburden dump 18 (ob18), Chingola, cooperbelt, Zambia |
South Africa |
|
Ružica Lekovski, Miomir Mikić,Daniel Kržanović |
Environmental protection of open pit Smiljkova Glava near Negotin |
Serbia |
|
Ružica Lekovski, Radoje Pantović, Miomir Mikić |
Recultivation of benches plain of limeston open pit Smiljkova Glava near Negotin |
Serbia |
|
Stefan Ovidiu, Gabriel Badescu , Mihaela Soponar |
Proposals for use of underground space mining from mining area Baia Mare for tourist activities |
Romania |
|
Marina Nicolova, Irena Spasova, Plamen Georgiev, Stoyan Groudev |
Bioremediation of polluted waters in a polymetallic deposit by means of a passive system |
Bulgaria |
|
Emina Požega, Lidija Gomidželović, Vlastimir Trujić |
Behaviour of cadmium as toxic metal in polymetallic copper raw materials – example of Čoka Marin concentrate |
Serbia |
|
Radmila Marković |
Change the cell voltage during the electrolytic refining of non-standard copper anodes |
Serbia |
|
Tatjana Apostolovski-Trujić, Novica Milošević, Vojka Gardić, Bisenija Petrović |
Testing of emissions caused by the treatment of Al-slag in the laboratory |
Serbia |
|
Viša Tasić, Novica Milošević, Renata Kovačević, Nevenka Petrović, Suzana Stanković |
Comparation of two particulate matter (PM) measuring methods |
Serbia |
|
Mirjana Stojanović, Jelena Milojković, Mirko Grubišić, Dragi Stevanović |
Zeolite/natural phosphate a novel slow release of phosphorus fertilizer |
Serbia |
|
Aleksandar Ćosović, Vladimir Adamović, Tatjana Šoštarić, Jelena Avdalović, Zorica Lopičić |
Evaluation of natural and modified zeolites for nitrogen monoxide removal |
Serbia |
|
Vladimir Adamović, Tatjana Šoštarić, Aleksandar Ćosović, Zorica Lopičić, Jelena Avdalović |
Distribution profiles of dust particles in mineral processing |
Serbia |
| Sanja J. Bugarinović, Milan Ž. Trumić, Grozdanka D. Bogdanović | Mining solid waste in the Coper Mining and Smelting Complex Bor | Serbia |
|
I n d u s t r i a l e n g i n e e r i n g |
||
|
Marijana Pavlov, Viša Tasić, Dragan Milivojević, Vladimir Despotović |
Weight measuring, data aquisition and their integration in Corporation information system in RTB Bor |
Serbia |
|
R e c y c l I n g t e c h n o l o g I e s |
||
|
Silvana Dimitrijević, Suzana Dragulović, Vlastimir Trujić |
Refinment gold from gold contact scrap of electronic computers |
Serbia |
|
V. C. Stamenković, V. Marjanović. A. Ivanović |
Recycling in the metals industry coexisting with environmental regulations |
Serbia |
|
B.Petrović, V.Gardić, Lj.Radović, V.Conić, D.Vračarić |
Influence of zinc coating structure on etching process in acid solution |
Serbia |
|
Rodoljub Stanojlović, Zoran Štirbanović, Jovica Sokolović |
The grinding product fineness, a factor for economical processing of smelter slag |
Serbia |
| Slobodanka Marinkovic, Prvoslav Trifunovic, Rade Tokalic | Recycling of power plant wastes for road construction | Serbia |
|
S o f t w a r e e n g i n e e r i n g a p p l i c a t i o n s |
||
|
Mohammad Sadeghi, Jafar Mahmoudi |
Used simulation method for optimization production parts in high pressure die casting process |
Sweden |
|
M.P.Sandalski, B.S.Boyanov, P.G.Georgiev, A.K.Sotirov |
Web-based expert system for optimization of processes in chemical technology |
Bulgaria |
|
Emina Požega, Lidija Gomidželović, Vlastimir Trujić, Dragana Živković |
Visualising copper smelting with computational thermodynamics |
Serbia |
| Adila Nurić, Samir Nurić, Enver Hercegovac, Šehval Lapandić, Mirad Delić | Methodologies of calculation mass for construction plateau on the site "Strelište" Velika Ribnica-Banovići | Bosnia and Herzegovina |
|
M a n u f a c t u r I n g t e c h n o l o g I e s |
||
|
Bashir S. Raddad |
Experimental investigation of forming of tube side edge by hole expansion |
Lybia |
|
Q u a l i t y m a n a g e m e n t |
||
|
Vesna Krstić, Emina Pozega, Lidija Gomidzelović |
Iso/iec 17025 implementation |
Serbia |
|
Aleksandra Ivanović, Biserka Trumić, Vojka Gardić, Vesna Marjanović, Vesna Stamenković |
Installation, maintenance and development of quality systems at the Institute of mining and metallurgy – positive experiences |
Serbia |
| Mirela Mazilu, Mariana Ciobanu | The Sustainable Development – The Human Development – The Quality Of Life ,an imperative triangle. | Romania |
|
O t h e r r e l a t e d f I e l d s |
||
|
Alen Stranjik, Ivan Toth, Branko Božić |
Explosives database regulated by European standards |
Croatia |
|
Biserka Trumić, Branko Matović, Draško Stanković |
Characterization of modern ceramic supports of automotive catalysts for coating of platinum metals |
Serbia |
|
Ivana Ilić, Dragana Živković, Dejan Bogdanović |
The influence of meteorological parameters on Cr concentration in PM10 |
Serbia |
|
Marica Dugić, Pero Dugić, Nedeljko Jeremić, Radmila Macura |
Problematics in usage of hydraulic oils in mining mechanization |
Bosnia and Herzegovina |
|
Milica Bošković |
Implementation of modern monitoring systems for working process and quality control measures at steel industry |
Serbia |
|
Mirko Ivković |
Rezultati istraživanja uticaja primenjenih sistema podzemnog otkopavanja uglja na povređivanje rudara u jamama rudnika JP PEU - Resavica |
Serbia |
|
R. Perić, Z. Karastojković, D. Gusković |
Spring beck effect in production of hollow jewels from 585 gold alloy |
Serbia |
|
Z. Karastojković, R. Perić, D. Gusković |
Bimetal filler brazing metal from 585 gold |
Serbia |
|
Vesna Grekulović, Mirjana Rajčić-Vujasinović, Zoran Stević |
Electrochemical behaviour of CuAg alloy in alkaline medium in presence of chloride ions |
Serbia |
|
Vladimir Cvetkovski, Vesna Conić, Milovan Vuković, Biljana Jovanović, Goran Stojanovski, Milena Cvetkovska |
Microbial and ferric leaching of copper smelter dusts |
Serbia |
|
Z. Karastojković, Z. Kovačević, Z. Janjušević |
Metallurgy of creep |
Serbia |
|
Z. Kovačević, Z. Karastojković, A. Raković |
Evaluation creeping the superheater tubes made of steel 14 CrMoV 6 3 |
Serbia |
|
H. Yavuz, S. Demirdag, S. Caran, R. Altindag |
Effect of Heat on Some Material Properties of Rocks |
Turkey |
|
S. Demirdag, H. Yavuz, N.Sengun, R. Altindag |
Variation of P-wave velocity and Schmidt Rebound Hardness of igneous rocks with uniaxial compressive stress |
Turkey |
|
Salem A. Farhat, Mohamed K. Al-Taleb |
An alternative technique for optical analysis of Laminar Diffusion Flame Dynamics |
Lybia |
|
Vojka Gardić, Bisenija Petrović, Vesna Conić, Dragan Milanović |
Mechanism of Pickling and Etching process in hot dip galvanizing plant |
Serbia |
|
Radomir Stevanović, Andrija Savić, Radmila Marković, Radojka Jonović, Ljiljana Avramović |
Choice of extractant for copper extraction from acidic sulfate solution obtained by leaching of flotation tailings |
Serbia |
|
Radomir Stevanović, Radmila Marković, Andrija Savić and Svetlana Čupić |
Chemical Model of Copper Extracion from Acidic Sulphate Solution by LIX984 Extractant |
Serbia |
| Ali Musbah Tajouri, Hassan Alhussan Abu-Arbia | Economic & environmental impact of LISCO solid wastes | Lybia |
| Zvonimir D. Stanković, Mirjana M. Rajcic-Vujasinović, Vesna J. Grekulović | The integral capacitance, kinetics and mechanism of the Cu(Me)/ Cu(II) system in sulphuric acide media | Serbia |
| Vesna Lazarevic, Ivan Krstic, Vlada Veljkovic, Ljiljana Takic | Design solution for the treatment of wastewater emulsion from metalworking | Serbia |
| Said H. S. Eshtewi | Cracks of Sheet Metal Dies During Heat Treatment | Lybia |
| Miroslav Milićević | Description of the use of ferrite TDK concentrator in the process of inductive heating and welding | Serbia |
| Miroslav Milićević | Analyses of the use of magneto dielectric Fluxtrol B concentrator in the process of inductive heating and welding | Serbia |
| Miroslav Milićević | Identification of the use of magneto dielectric Fluxtrol A concentrator in the process of inductive heating and welding | Serbia |
| Miroslav Milićević | Estimation of the use of ferrite EI concentrator in the process of inductive heating and welding | Serbia |
| Miroslav Milićević | Thyristors converters for electrothermia | Serbia |
| Miroslav Milićević | Transistor converters in the electrothermia | Serbia |
| Hassan Ramadan Zaid | Influence of cutting parameters in turning on multi-response of C45 carbon steel using grey-based Taguchi methods | Lybia |
| Alagali Mohamed Abosdell, Abdulbaset Ali Frefer | The Effect of Ceramic Coating Thickness of Air Thermal-Sprayed Zirconia stabilized With 8% Yttria on Ni-Cr Base Alloyy | Lybia |
last changed 3 September 2010.
